Here the Tough hit 73.49MB/s write and 146.5MB/s read. For this review we will be comparing the JumpDrive Tough to the following thumb drives:įirst we’ll look at 2MB sequential speeds. The other end has a removable cap with the USB interface underneath.įor performance we ran IOMeter on our HP Z640 workstation. The thumb dive has a loop on one side where a user can slip it onto a key chain or a carabiner. The over all outer case is study with a little bit of give when one squeezes it. The protective outer case is a stylish dark gray with light blue highlights. The Lexar JumpDrive Tough is a little bulkier than the standard thumb drive of similar capacity, but is still lightweight. Interface: USB 3.1 (backward compatible with USB 3.0 and 2.0).The Lexar JumpDrive Tough comes with a 3-year warranty and is price at $20 for the 32GB, $27 for the 64GB, and $45 for the 128GB. The JumpDrive Tough aims to protect data inside and out. Data can automatically be encrypted through a password-protected vault. That takes care of external security on the inside the thumb drive uses Lexar’s EncryptStick Lite software with 256-bit AES encryption. If data is being collected and needs to be stored, users needn’t worry about the JumpDrive Tough having a spill, getting wet, or getting hot and not working. This is good news to professionals that do a lot of fieldwork or enthusiasts that take the adventurous route. To live up to its Tough name, the new thumb drive is pressure resistant up to 750 PSI, able to withstand temperature between -13☏ to 300☏, and is water resistant up to 98 feet. To top it off, it is also built to be rugged enough to take a few bumps along the way, without the price increase typically seen in rugged devices. The new JumpDrive Tough is a USB 3.1 thumb drive with stated transfer speeds of 150MB/s read and 60MB/s write and a maximum capacity of 128GB. Launch the program and then use the File Menu to restore the data from the backup vault that is stored on your computer.Last week, Lexar announced the release of its latest JumpDrive thumb drive, the JumpDrive Tough. When you have inserted a new flash drive, download and install the program. You have purchased a full license for ENC DataVault (If the existing license is fully used, you can purchase another license after you have lost your device). You recall your login password to open the vault(s) that were backed up.Note: Only those files backed up can be recovered You have made a backup of your vault (see backup procedures below).In the event that you lose your drive you can only access the data in vaults on your PC/Mac if the conditions below are met: There is a Lost Flash Drive Data Recovery Feature in the software. Only data and files backed up can be recovered. IMPORTANT: Proper backup procedures must be followed in order to be able to recover data. Then use the Restore Vault Data tool in the program Menu to recover the data from the last vault backup. Just buy a new USB flash drive and then install and activate ENC DataVault on that drive, using either your existing license (or a new one if your existing license is used up). First and foremost, your lost files are not accessible by anyone, and are safely and securely stored in the vault.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |